Pi hsc505 installation manual

User instructions of JA-60 Comfort - PDF -

Event sources: 1 to 16 zone input number c1 to c8 wireless controller or keypad number C control panel A wireless siren J sub system (other JA-60 or 65 system enrolled) L telephone line d dital line (PC interface, keypad JA-60E, ) F wireless communication of the keypad lost (JA-60F only) control panel modes: P programming mode U user mode (bypass setting, testing, battery replacement, voice dialer setting) H home (partial) arming (inputs & wireless detectors addressed to B section are bypassed) 2.

EasyLoader AV-2008, AV-2016 Dublo - PDF -

Access codes section A arming (split system) section B arming (split system) arming of the complete system a zone is bypassed when arming waiting for more data to complete entry The control panel can be operated with the following codes (by JA-60E or JA-60F keypad or via connected PC): Master code User codes Service code is an extra user code, which can be used for arming, disarming but also for code changes, entering of user mode, bypass setting, system testing, battery replacement, voice dialer programming (if enabled by installer) - factory default Master code is If the system is split, the use of MC will arm all sections if no section is armed or it will disarm all sections if any is armed.

Control Panels D9412GV3/D7412GV3/D7212GV3. UL <i>Installation</i>.

Control Panels D9412GV3/D7412GV3/D7212GV3. UL Installation.

If no code arming is disabled and the system is spilt then entering F1 MC will effect only section A and entering F2 MC will effect only section B.

Installation Manual - DSC

Fault power loss, lost communication with a detector etc., (confirm pressing key N) Battery Armed Power Two dits display battery of the device specified on the display is low. continues = armed, slow blinking = exit delay, fast blinking = entrance delay continues = AC power & back-up battery are O.


Pi hsc505 installation manual:

Rating: 91 / 100

Overall: 94 Rates